![Hier klicken, um den Treffer aus der Auswahl zu entfernen](images/unchecked.gif) |
Titel |
Stratospheric and mesospheric wind measurements from the new WIRA-C wind radiometer and comparison to the Doppler lidar on La Réunion island |
VerfasserIn |
Jonas Hagen, Niklaus Kämpfer, Sergey Khaykin, Alain Hauchecorne |
Konferenz |
EGU General Assembly 2017
|
Medientyp |
Artikel
|
Sprache |
en
|
Digitales Dokument |
PDF |
Erschienen |
In: GRA - Volume 19 (2017) |
Datensatznummer |
250140249
|
Publikation (Nr.) |
EGU/EGU2017-3612.pdf |
|
|
|
Zusammenfassung |
Measurements of wind speeds in altitudes between 30 and 70 km are surprisingly rare.
Passive microwave radiometry and Doppler lidar techniques provide two methods for
covering this gap region. With the Rayleigh-Mie Doppler wind lidar of CNRS/INSU
(Guyancourt, France) and OSUR (La Réunion, France) and the passive microwave
radiometer WIRA-C of the IAP (Bern, Switzerland) two such instruments are collocated in
the Maïdo observatory on the tropical island La Réunion (21∘ South, France). Both
instruments participate in the ARISE2 project that is funded by the European Commission
Horizon 2020.
The Rayleigh-Mie Doppler wind lidar is an active sounder, measuring the Doppler shift of
backscattered visible light and can provide wind profiles from 5 up to 50 km with a
vertical resolution of up to 100 m and an accuracy better than 1 m-
s up to 30 km.
On the other side, WIRA-C is a passive microwave radiometer that measures the
Doppler shift of the ozone thermal emission line at 142 GHz. The radiometer has a
high spectral resolution of 12.2 kHz and a band width of 200 MHz and can thus
exploit the pressure broadening of the ozone line to retrieve an altitude resolved wind
profile. The retrieval is based on a model of the atmosphere and optimal estimation
techniques implemented by ARTS and Atmlab/Qpack, but in contrast to previous
versions the atmospheric model is three-dimensional. Meaningful wind speeds can
be retrieved for an altitude range of 30 to 70 km with a vertical resolution of up
to 4 km. WIRA-C is able to measure continuously, independent of daylight and
clouds.
WIRA-C has been installed on the Maïdo observatory in August 2016 and has measured
since then whenever the optical thickness of the atmosphere was low enough. The Doppler
lidar at Maïdo was operated on a campaign basis since 2013 and routinely twice a week since
September 2015.
We present the WIRA-C instrument and its measurement results for the tropical summer
2016/17 and compare them to coincident measurements of the Rayleigh-Mie Doppler wind
lidar. Further, we compare the measurements to ECMWF model data and, on the lower
domain around 30 km altitude, to balloon soundings. |
|
|
|
|
|