![Hier klicken, um den Treffer aus der Auswahl zu entfernen](images/unchecked.gif) |
Titel |
A new method of combined techniques for characterization and monitoring of seawater interface in an alluvial aquifer |
VerfasserIn |
Albert Folch, Laura del Val, Linda Luquot, Laura Martínez, Fabián Bellmunt, Hugo Le Lay, Valentí Rodellas, Nuria Ferrer, Sheila Fernández, Juanjo Ledo, Philippe Pezard, Olivier Bour, Pilar Queralt, Alex Marcuello, Jordi Garcia-Orellana, Maarten Saaltink, Enric Vázquez-Suñé, Jesús Carrera |
Konferenz |
EGU General Assembly 2016
|
Medientyp |
Artikel
|
Sprache |
en
|
Digitales Dokument |
PDF |
Erschienen |
In: GRA - Volume 18 (2016) |
Datensatznummer |
250135350
|
Publikation (Nr.) |
EGU/EGU2016-16205.pdf |
|
|
|
Zusammenfassung |
Understand the dynamics of the fresh-salt water interface in aquifers is a key issue to comprehend mixing process and to quantity the discharge of nutrients in to coastal areas. In order to go beyond the current knowledge in this issue an experimental site has been set up at the alluvial aquifer Riera Argentona (Barcelona – Spain). The site comprises 16 shallow piezometers installed between 30 and 90 m from the seashore, with depths ranging between 15 and 25 meters. The seawater interface is being monitored using several techniques, the combination of which will help us to understand the spatial and temporal behaviour of the mixing zone and the geochemical processes occurring there. Specially the deepest piezometers are equipped with electrodes in order to perform cross-hole electrical resistivity tomography (CHERT). In addition, all piezometers are also equipped with Fiber Optic cable to perform distributed temperature measurements. Two single steel armoured fibre optic cable lines of around 600m length were installed in all boreholes. The objective is to use the cable both as passive and active temperature sensor. The first is being done for the continuous monitoring of temperature whereas; the second provides a higher temperature resolution used to monitor field experiments.
Periodic CHERT measurements are carried out between the piezometer equipped with electrodes, resulting in parallel and perpendicular vertical cross sections of the site resistivity. The position of the fresh-salt water interface can be identified due to the resistivity contrast between the saline and fresh water. Preliminary results of periodic distributed temperature measurements will be also be used to monitor the position of the mixing zone thanks to the contrast and seasonal temperature changes. Periodic down-hole EC profiles will be used to validate the method.
Acknowledgements
This work was funded by the projects CGL2013-48869-C2-1 y CGL2013-48869-C2-2-R of the Spanish Government. We would like to thank SIMMAR (Serveis Integrals de Manteniment del Maresme) and the Consell Comarcal del Maresme in the construction of the research site. |
|
|
|
|
|