![Hier klicken, um den Treffer aus der Auswahl zu entfernen](images/unchecked.gif) |
Titel |
Development and testing of a large, transportable rainfall simulator for plot-scale runoff and parameter estimation |
VerfasserIn |
T. G. Wilson, C. Cortis, N. Montaldo, J. D. Albertson |
Medientyp |
Artikel
|
Sprache |
Englisch
|
ISSN |
1027-5606
|
Digitales Dokument |
URL |
Erschienen |
In: Hydrology and Earth System Sciences ; 18, no. 10 ; Nr. 18, no. 10 (2014-10-22), S.4169-4183 |
Datensatznummer |
250120503
|
Publikation (Nr.) |
copernicus.org/hess-18-4169-2014.pdf |
|
|
|
Zusammenfassung |
There is increased interest in the interplay between vegetation conditions
and overland flow generation. The literature is unclear on this relationship,
and there is little quantitative guidance for modeling efforts. Therefore,
experimental efforts are needed, and these call for a lightweight
transportable plot-scale (>10 m2) rainfall simulator that can be
deployed quickly and quickly redeployed over various vegetation cover
conditions. Accordingly, a variable-intensity rainfall simulator and
collection system was designed and tested in the laboratory and in the field.
The system was tested with three configurations of common pressure washing
nozzles producing rainfall intensities of 62, 43, and 32 mm h-1
with uniformity coefficients of 76, 65, and 62%, respectively, over a
plot of 15.12 m2. Field tests were carried out on a grassy field
with silt–loam soil in Orroli, Sardinia, in July and August 2010, and
rainfall, soil moisture, and runoff data were collected. The two-term Philip
infiltration model was used to find optimal values for the saturated
hydraulic conductivity of the soil surface and bulk soil, soil water
retention curve slope, and air entry suction head. Optimized hydraulic
conductivity values were similar to both the measured final infiltration rate
and literature values for saturated hydraulic conductivity. This inexpensive
(less than USD 1000) rainfall simulator can therefore be used to identify
field parameters needed for hydrologic modeling. |
|
|
Teil von |
|
|
|
|
|
|