![Hier klicken, um den Treffer aus der Auswahl zu entfernen](images/unchecked.gif) |
Titel |
Smog events over Athens during winter 2013-2014: Pollution measurements and chemical characterization |
VerfasserIn |
Evangelos Gerasopoulos, Eleni Liakakou, Vassilis Psiloglou, Jason Stavroulas, Luciana Fourtziou, Nikolaos Roukounakis, Maria Lianou, Nikolaos Kappos, Pavlos Zarmpas, Harry Kambezidis, Jean Sciare, Nikolaos Mihalopoulos |
Konferenz |
EGU General Assembly 2014
|
Medientyp |
Artikel
|
Sprache |
Englisch
|
Digitales Dokument |
PDF |
Erschienen |
In: GRA - Volume 16 (2014) |
Datensatznummer |
250097209
|
Publikation (Nr.) |
EGU/EGU2014-12764.pdf |
|
|
|
Zusammenfassung |
Smog due to wood burning has evolved to a major pollution problem affecting
the most populated Greek cities during winter time. The economic crisis and the
subsequent increase in the price of heating oil, has led people to look for alternative
ways for domestic heating. Wood burning appeared to be the most common option,
resulting to a rapid increase of pollution levels during nighttime, with emphasis on
particulate matter. Taking into account the fact that highly populated cities such
as Athens are also overloaded with traffic pollution, the need for specialized air
quality measurements for the evaluation of the newly emerged problem was an
imperative.
Measurements of smog related pollution components in Athens took place during winter
2013-2014, at the premises of the National Observatory of Athens in Thissio (city center).
The site was selected as representative of the average situation in Athens, while most of
wood burning activities take place in Athens’ suburban areas. For the chemical
characterization of the smog particles, on line chemistry monitoring was performed
by an Aerosol Chemical Speciation Monitor (ACSM, with 30 minutes resolution
for the determination of organics, ammonium, sulfate, nitrate and chloride) and a
Particle Into Liquid Sampler coupled with an Ionic Chromatograph (PILS, with 15
minutes resolution for the determination of ammonium and potassium). Additionally,
aerosol samples were collected on 12-hour basis using a sequential dichotomous
sampler for the sampling of PM2.5, PM2.5-10and PM10 fractions of aerosols on quartz
filters, for further analyses, while a beta attenuation PM monitor was also deployed.
Gas analyzers were installed for continuous NOx (NO, NO2), SO2, CO and O3
monitoring on 1-minute resolution. Finally, black carbon (BC) measurements were
conducted with: a Particle Soot Absorption Photometer, a portable Aethalometer and
two Multi Angle Absorption Photometers. The meteorological conditions were
recorded during the whole period of the campaign and additional information about the
vertical distribution of aerosols and the mixing height was provided by means of a
ceilometer.
The first measurements and analyses have demonstrated that the daily limit of 50 μg/m3is
exceeded quite often. An increase on the frequency of smog events was detected mainly
during weekends depending also on the meteorological conditions (low temperatures and
wind). A strong daily variation was observed with a 5-6 hours window (20:00-2:00 LT) of
peak values in the order of 150-200 ug/m3. Parallel measurements from the National Network
revealed much higher values in the areas of peak smog presence, sometimes exceeding
120-150 ug/m3(daily values). With the use of specific wood burning indices like potassium,
levoglucosan and wood burning related BC, the effect of wood burning was isolated
and evaluated compared to other sources of pollution (e.g. traffic, central heating). |
|
|
|
|
|